Battery Tender 021-0134 10-Bank 12V Battery Management System

Battery Tender 021-0134 10-Bank 12V Battery Management System Review

Battery Tender 021-0134 10-Bank 12V Battery Management System Feature

• Simultaneously charges and/or maintains up to 10 12-volt batteries, providing 12 volts/2 amps per charging bank
• Includes six foot lead with aligator clamps and a 3-year warranty
• Complete 4-step charging program (initialization, bulk charge, absorption mode and float mode) that maintains batteries at full charge without overcharging via its 4-step charging system
• Spark-free design via microchip circuitry that will not activate output voltage until clips are correctly connected to battery
• Reverse polarity protection and a built-in 72-hour safety timer ensures batteries attain float mode status

The Battery Tender 12-volt/2-amp 10-Bank Battery Management System is designed for commercial use in keeping up to 10 12-volt batteries simultaneously charged and maintained, each at its proper storage voltage without the damaging effects caused by some trickle chargers. Compatible with all AGM (absorbed glass mat), sealed maintenance free and flooded batteries commonly found in everything from some automotive/farm equipment to motorcycles, ATV’s, and personal watercraft, this lightweight, microprocessor controlled unit provides safe, constant, 4-step charging current for every vehicle stored in your shop. Simultaneous charging of up to 10 separate batteries. View larger. The 4-step charge cycle detailed. View larger. Smart, Commercial Grade 4-step Battery Charging The first fully automatic, constant-current battery charger designed to charge and/or maintain up to 10 12-volt batteries simultaneously at 2 amps, the Battery Tender 12-volt/2-amp 10-Bank Battery Management System utilizes a 4-step charging program (initialization, bulk charge, absorption mode and float mode), that allows users to connect the charger to up to 10 batteries, either in or out of a vehicle, with the confidence that all are being maintained at optimal performance levels. This makes it extremely useful for battery rotation, where a battery is removed from service during repair or in preparing batteries for sale. It is also safe for your batteries, with the built-in ability to automatically switch its output voltage to a storage or float level that eliminates the need to worry about the damaging effects of overcharging, and the resulting need to check on the condition of a charging battery. If or when the battery voltage drops too far under load, this same smart technology resumes output power and the charging cycle begins again. The unit also features sparkproof connectors, reverse polarity protection, a 72-hour safety timer that ensures batteries attain float mode status during charging, an easy to understand charging status LED indicator for each charging bank, durable construction and almost no current draw from batteries connected to it. Key Features: Simultaneously charges and/or maintains up to 10 12-volt batteries. 12 volts/2 amps per charging bank. Maintains batteries at full charge without overcharging via its 4-step charging system. Spark-free design via microchip circuitry that will not activate output voltage until clips are correctly connected to battery. Reverse polarity protection and a built-in 72-hour safety timer that ensures batteries attain float mode status. Six foot lead with alligator clamps included. 3-year warranty. Charger Models Output Voltage Output Current Charging Software*/ Battery Type AC Voltage/ Frequency Input (Volts) (Amps) Battery Tender Junior 6V Battery Charger 6V 0.750A 3 Step STD & AGM 120 VAC, 60 Hz Battery Tender Junior 12V Battery Charger 12V 0.750A 4 Step STD & AGM 120 VAC, 60 Hz Waterproof 800 12V Battery Charger 12V 0.800A 3 Step STD & AGM 100 to 240 VAC, 50/60 Hz Battery Tender Plus 6V Battery Charger 6V 1.25A 4 Step STD & AGM 120 VAC, 60 Hz Battery Tender Plus 12V Battery Charger 12V 1.25A 4 Step STD & AGM 120 VAC, 60 Hz Battery Tender Plus 12V Battery Charger (Gel Cell) 12V 1.25A 4 Step STD & AGM or GEL 120 VAC, 60 Hz Battery Tender Twin 800 12V Dual Battery Charger 12V 0.800A 3 Step STD & AGM 100 to 240 VAC, 50/60 Hz Battery Tender 12V 2-Bank Battery Management System 12V 1.25A 3 Step STD & AGM 100 to 240 VAC, 50/60 Hz Battery Tender 12V 4-Bank Battery Management System 12V 1.25A 4 Step STD & AGM 100 to 240 VAC, 50/60 Hz Battery Tender 12V 5-Bank Battery Management System 12V 2.0A  4 Step STD & AGM 120 VAC, 60 Hz Battery Tender 12V 10-Bank Battery Management System 12V 2.0A  4 Step STD & AGM 120 VAC, 60 Hz *Note: All Deltran battery chargers will charge all types of lead acid batteries: either flooded (standard STD), sealed maintenance free Absorbed Glass Mat (AGM), or sealed maintenance free gelled electrolyte (GEL) batteries. However, for optimum battery performance in deep cycle applications (for example, running a trolling motor), it is best to chose the Deltran charger that has the charging software specifically designed for the battery type. Fortunately, since the technical staff at Deltran has developed charging software that works equally well for both STD & AGM batteries, the only choice to be made is between 2 models: either STD & AGM or GEL software. Three-year Limited Warranty Deltran provides a limited three-year warranty on its Battery Tender 12-volt/2-amp 10-Bank Battery Management System to the original purchaser based on defective material or workmanship. Warranty is void in cases of product misuse, disassembly or modification. Other details regarding warranty limitations and procedures are contained in the Deltran Battery Tender Charger's general limited warranty information sheet enclosed with this product.

The Battery Tender 10-Bank charger is a top-of-the-line 12 volt 2.0 amp per circuit charger, perfect for automotive, motorcycle and marine repair and maintainence shops. The 10-Bank uses micro-processor technology in a four-stage charging profile to charge, improve, and float the battery so it is ready when you are. Constant current charging and regulated voltage patterns allow the battery to be recharged fully and safely without the fear of overcharging. The lights above each station indicate the stage of charge so there is no guesswork in the shop. The 10-Bank BatteryTender is used in battery rotation, when a battery is removed from service during repair or in preparing batteries for sale.

Battery Tender 021-0144 Battery Tender Plus 6V Battery Charger

Battery Tender 021-0144 Battery Tender Plus 6V Battery Charger Review

Battery Tender 021-0144 Battery Tender Plus 6V Battery Charger Feature

• Spark proof and reverse polarity protected; unit includes a quick connect harness for use in hard to reach areas
• Perfect for all lead-acid, flooded or sealed maintenance free batteries (AGM and gel cell)
• Complete 4-step charging program (initialization, bulk charge, absorption mode and float mode) allows for optimization of battery power, without overcharging
• Automatically switches to float/maintenance voltage after fully charging the battery
• 10-year limited warranty

BatteryTender Plus is one of the most advanced charger/maintainers on the market and is especially designed for today's sealed lead acid batteries. The Battery Tender Plus uses micro-processor technology in a four-stage charging profile to charge, improve, and float your battery, so it will be ready when you are. Constant current charging and regulated voltage patterns allow the battery to be recharged fully and safely without the fear of overcharging.

Battery Tender 021-0123 Battery Tender Junior 12V Battery Charger

Battery Tender 021-0123 Battery Tender Junior 12V Battery Charger Review

Battery Tender 021-0123 Battery Tender Junior 12V Battery Charger Feature

• Spark proof during lead connection, reverse polarity protected and includes a 12-foot output cord and 5-year warranty
• Perfect for charging all 12-volt lead-acid, flooded or sealed maintenance free batteries (AGM and gel cell)
• Complete 4-step charging program (Initialization, Bulk Charge, Float Mode) allows for optimization of battery power, without overcharging
• Automatic charge cycle functionality switches to float mode after fully charging the battery
• Solid state two color LED indicates stage of charger

The Battery Tender Junior 12-volt/75-amp battery charger is the small and simple solution to the challenge of keeping vehicle batteries optimally powered when not in use. It is able to charge any lead-acid battery, including standard and sealed AGM and GEL Cell battery types and is also designed to be easy to use in small spaces, to utilize a 4-step charging program and safely function in a fully automatic mode. Taken together this makes the Battery Tender Junior 12-volt charger an excellent means of ensuring that your battery is fully charged and ready to go when you are. 4-step charging with automatic float mode. View larger. Charge any lead acid battery, including AGM and gel cell. View larger. Safe, 4-step Battery Charging The Battery Tender Junior 12-volt charger is much more than a trickle charger. It has a "brain". Utilizing a 4-step charging program (initialization, bulk charge, absorption mode and float mode), it allows you to simply connect the charger to a battery, either in or out of a vehicle, and forget about it until you are ready to put the battery to work. Like all Battery Tender chargers, at the end of the regular charger cycle it automatically switches its output voltage to a safe, storage or float level that eliminates the need to worry about the damaging effects of overcharging, and the resulting need to check on the condition of the battery. If/when the battery voltage drops too far under load, output power resumes and the charging cycle begins again. The unit also features sparkproof connectors, short circuit and reverse polarity protection, an easy to understand charging status indicator consisting of a single LED, and almost no current draw from batteries connected to it. Key Features: Perfect for all lead-acid, flooded or sealed maintenance free batteries (AGM and gel cell). Complete 4-step charging program (initialization, bulk charge, absorption mode and float mode). Automatically switches to float / maintenance voltage after fully charging the battery. If the battery voltage drops too far under load, full charger output power resumes. Solid state two color LED indicates stage of charger. Spark proof and reverse polarity protected. 12' output cord. 5 year warranty. Charger Models Output Voltage Output Current Charging Software*/ Battery Type AC Voltage/ Frequency Input (Volts) (Amps) Battery Tender Junior 6V Battery Charger 6V 0.750A 3 Step STD & AGM 120 VAC, 60 Hz Battery Tender Junior 12V Battery Charger 12V 0.750A 4 Step STD & AGM 120 VAC, 60 Hz Waterproof 800 12V Battery Charger 12V 0.800A 3 Step STD & AGM 100 to 240 VAC, 50/60 Hz Battery Tender Plus 6V Battery Charger 6V 1.25A 4 Step STD & AGM 120 VAC, 60 Hz Battery Tender Plus 12V Battery Charger 12V 1.25A 4 Step STD & AGM 120 VAC, 60 Hz Battery Tender Plus 12V Battery Charger (Gel Cell) 12V 1.25A 4 Step STD & AGM or GEL 120 VAC, 60 Hz Battery Tender Twin 800 12V Dual Battery Charger 12V 0.800A 3 Step STD & AGM 100 to 240 VAC, 50/60 Hz Battery Tender 12V 2-Bank Battery Management System 12V 1.25A 3 Step STD & AGM 100 to 240 VAC, 50/60 Hz Battery Tender 12V 4-Bank Battery Management System 12V 1.25A 4 Step STD & AGM 100 to 240 VAC, 50/60 Hz Battery Tender 12V 5-Bank Battery Management System 12V 2.0A  4 Step STD & AGM 120 VAC, 60 Hz Battery Tender 12V 10-Bank Battery Management System 12V 2.0A  4 Step STD & AGM 120 VAC, 60 Hz *Note: All Deltran battery chargers will charge all types of lead acid batteries: either flooded (standard STD), sealed maintenance free Absorbed Glass Mat (AGM), or sealed maintenance free gelled electrolyte (GEL) batteries. However, for optimum battery performance in deep cycle applications (for example, running a trolling motor), it is best to chose the Deltran charger that has the charging software specifically designed for the battery type. Fortunately, since the technical staff at Deltran has developed charging software that works equally well for both STD & AGM batteries, the only choice to be made is between 2 models: either STD & AGM or GEL software. Five-year Limited Warranty Deltran provides a limited five-year warranty on its Battery Tender Junior 12V Battery Charger to the original purchaser based on defective material or workmanship. Warranty is void in cases of product misuse, disassembly or modification. Other details regarding warranty limitations and procedures are contained in the Deltran Battery Tender Charger's general limited warranty information sheet enclosed with this product.

Battery Tender Junior 12V Battery Charger is much more than a trickle charger. It has a brain, is lightweight, compact, fully automatic and very easy to use especially in small spaces. This battery charger will keep the battery fully charged so that it is ready to go always. It has a microprocessor controlled fully automatic charger and maintainer and is designed to extend the life of any lead acid battery commonly used in automobiles, motorcycles, ATVs, personal watercraft, RVs, boats, airplanes, golf carts, back-up generator systems, etc. Any vehicle or battery-operated piece of equipment not used on a daily or regular basis is a candidate for a Battery Tender charger. The advanced technology will bring the battery back to a full charge without overcharging and then float or maintain the battery for an indefinite period of time. The Battery Tender Junior comes equipped with alligator clips and ring terminals for easy hook up. An optional 25 feet extension cord (part number 081-0148-25) is sold separately.

Battery Tender 081-0148-25 25' Quick Disconnect Extension Cable

Battery Tender 081-0148-25 25' Quick Disconnect Extension Cable Review

Battery Tender 081-0148-25 25' Quick Disconnect Extension Cable Feature

• 25 feet of DC extension cord
• Plugs into all Deltran Battery Tenders
• Allows access to Battery Tender from 30 feet from the battery
• Perfect for use with the multi-bank chargers

Battery Tender 25' Quick Disconnect Extension Cable is used to extend the length of the reach of the charger from input to battery. It can be used with the Battery Tender Junior, Plus, 4, 5, or 10 bank units.

Battery Tender 022-0148-DL-WH 12-Volt 4-Bank Battery Management System

Battery Tender 022-0148-DL-WH 12-Volt 4-Bank Battery Management System Review

Battery Tender 022-0148-DL-WH 12-Volt 4-Bank Battery Management System Feature

• Spark-proof and reverse polarity/short circuit protection
• Contains four independent stations capable of simultaneously charging at 12 volts/125 amps per charging bank
• Perfect for all AGM (absorbed glass mat), sealed maintenance free and flooded batteries
• Microprocessor-controlled constant current charging and temperature compensated to ensure optimum charge voltage according to ambient temperature
• Extremely lightweight at less than 3 lbs

The Battery Tender 12-volt/1.25-amp 4-Bank Battery Management System is designed to fully charge up to four 12-volt batteries simultaneously and maintain each at its proper storage voltage without the damaging effects caused by some trickle chargers. Compatible with all AGM (absorbed glass mat), sealed maintenance free and flooded batteries commonly found in some automotive/farm equipment, motorcycles, ATV’s, and personal watercraft, this lightweight, microprocessor controlled unit provides safe, constant, four-step charging current for every vehicle stored in your garage, shop, barn or boathouse. Simultaneous charging of four separate lead acid battery batteries, including AGM and gel cell. View larger. The 4-step charge cycle detailed. View larger. Safe, Smart, 4-step Battery Charging The Battery Tender 12-volt/1.25-amp 4-Bank Battery Management System is much more than a trickle charger. Utilizing a 4-step charging program (initialization, bulk charge, absorption mode and float mode), it allows users to simply connect the charger to up to four batteries, either in or out of a vehicle and forget about it until you are ready to use it, with the confidence that the batteries in all four vehicles are being maintained at optimal performance levels. This makes it perfect for seasonal and recreational vehicles like motorcycles, jet skis, ATV's, snowmobiles and more,. It is also safe for your battery because it utilizes advanced microprocessor technology that automatically switches its output voltage to a storage or float level. This feature eliminates the need to worry about the damaging effects of overcharging, and the resulting need to check on the condition of a charging battery. If or when the battery voltage drops too far under load, this same smart technology resumes output power and the charging cycle begins again. The unit also features spark-proof connectors, short circuit and reverse polarity protection, an easy to understand charging status LED indicator for each charging bank, durable yet lightweight construction and almost no current draw from batteries connected to it. Key Features: Four independent charging stations. 12 volts/1.25 amps per charging bank. Extremely lightweight at less than 3 lbs. Operates anywhere in the world. 100-240 VAC, 50/60 Hz. Microprocessor controlled constant current charging. Spark-proof and reverse polarity/short circuit protected. Temperature compensated to ensure optimum charge voltage according to ambient temperature. Perfect for all AGM (absorbed glass mat), sealed maintenance free and flooded batteries. Designed to meet U.S. and International product safety standards (UL/CE). 2-year warranty. Charger Models Output Voltage Output Current Charging Software*/ Battery Type AC Voltage/ Frequency Input (Volts) (Amps) Battery Tender Junior 6V Battery Charger 6V 0.750A 3 Step STD & AGM 120 VAC, 60 Hz Battery Tender Junior 12V Battery Charger 12V 0.750A 4 Step STD & AGM 120 VAC, 60 Hz Waterproof 800 12V Battery Charger 12V 0.800A 3 Step STD & AGM 100 to 240 VAC, 50/60 Hz Battery Tender Plus 6V Battery Charger 6V 1.25A 4 Step STD & AGM 120 VAC, 60 Hz Battery Tender Plus 12V Battery Charger 12V 1.25A 4 Step STD & AGM 120 VAC, 60 Hz Battery Tender Plus 12V Battery Charger (Gel Cell) 12V 1.25A 4 Step STD & AGM or GEL 120 VAC, 60 Hz Battery Tender Twin 800 12V Dual Battery Charger 12V 0.800A 3 Step STD & AGM 100 to 240 VAC, 50/60 Hz Battery Tender 12V 2-Bank Battery Management System 12V 1.25A 3 Step STD & AGM 100 to 240 VAC, 50/60 Hz Battery Tender 12V 4-Bank Battery Management System 12V 1.25A 4 Step STD & AGM 100 to 240 VAC, 50/60 Hz Battery Tender 12V 5-Bank Battery Management System 12V 2.0A  4 Step STD & AGM 120 VAC, 60 Hz Battery Tender 12V 10-Bank Battery Management System 12V 2.0A  4 Step STD & AGM 120 VAC, 60 Hz *Note: All Deltran battery chargers will charge all types of lead acid batteries: either flooded (standard STD), sealed maintenance free Absorbed Glass Mat (AGM), or sealed maintenance free gelled electrolyte (GEL) batteries. However, for optimum battery performance in deep cycle applications (for example, running a trolling motor), it is best to chose the Deltran charger that has the charging software specifically designed for the battery type. Fortunately, since the technical staff at Deltran has developed charging software that works equally well for both STD & AGM batteries, the only choice to be made is between 2 models: either STD & AGM or GEL software. Two-Year Limited Warranty Deltran provides a limited two-year warranty on its Battery Tender 12V 4-Bank Battery Management System to the original purchaser based on defective material or workmanship. Warranty is void in cases of product misuse, disassembly or modification. Other details regarding warranty limitations and procedures are contained in the Deltran Battery Tender Charger's general limited warranty information sheet enclosed with this product.

The Battery Tender 022-0148-DL-WH 12-volt/1.25-amp 4-Bank Battery Management System is designed to fully charge up to four 12-volt batteries simultaneously and maintain each at its proper storage voltage without the damaging effects caused by some trickle chargers. This lightweight, microprocessor-controlled unit provides a safe, constant, four-step charging current for every vehicle stored in your garage, shop, barn, or boathouse. The system is compatible with all AGM (absorbed glass mat), sealed maintenance-free and flooded batteries commonly found in some automotive/farm equipment, motorcycles, ATVs, and personal watercraft.

Battery Tender 800 Waterproof 12V Battery Charger

Battery Tender 800 Waterproof 12V Battery Charger Review

Battery Tender 800 Waterproof 12V Battery Charger Feature

• Spark proof and reverse polarity protected; protected by a 3-year limited warranty
• Designed for use on all AGM sealed maintenance free, lead calcium, and flooded batteries
• 100% waterproof and ultraportable at a size not bigger than a computer mouse
• Complete 3-step charging program (initialization, bulk charge, and float mode) for maintaining optimal performance levels without over charging
• Automatically switches to float/maintenance voltage after fully charging the battery

The Battery Tender Waterproof 800 12-volt/.80-amp Battery Charger is the ultraportable solution to the challenge of keeping vehicle batteries optimally powered when not in use, and in situations where water may be present. It is able to charge any lead-acid battery, including standard and sealed AGM and GEL Cell battery types, and is also designed to be easy to use in small spaces, to utilize a 3-step charging program and safely function in a fully automatic mode. Taken together this makes the Waterproof 800 an excellent means of ensuring that the batteries for your ATV's, watercraft, motorcycles and boats are fully and safely charged and ready to go when you are. 3-step charging with automatic float mode. View larger. Completely waterproof and ultraportable. View larger. Charges all lead acid battery types. View larger. Safe, 3-step Battery Charging The engineers at Deltran led the way in innovation and convenience by introducing the International Battery Tender Waterproof 800. Since its introduction in 2003, it has been widely accepted as a solid new addition to the Battery Tender family of charger products. This compact 800 mA battery charger has all the charge characteristics of its cousin the Battery Tender Junior. It incorporates highly efficient surface mount technology electronic components. The interior is completely encapsulated, protected from shock, vibration, and moisture by an electrically insulating, thermally conductive, flame retardant, UL recognized, synthetic epoxy resin compound. It's tough, affordable, and a strong, innovative battery charging solution. This charger is no larger than a standard computer mouse yet packs 800 millamps of pure constant current charging power. Coupled with a "brain" (IC chip) and a 3-step charging system that constantly cycles through monitoring, charging, and then maintaining your battery--even while totally submersed under water--it's perfect for all outdoor types of ATV's, watercraft, motorcycles, boats, or anywhere water is a threat. Key Features: 100% waterproof. Complete 3-step charging program (initialization, bulk charge, and float mode). Automatically switches to float / maintenance voltage after fully charging the battery. 12v-800mA "Super Smart" technology. Spark proof and reverse polarity protected. Designed for use on all AGM sealed maintenance free, lead calcium, and flooded batteries. Three year warranty. Charger Models Output Voltage Output Current Charging Software*/ Battery Type AC Voltage/ Frequency Input (Volts) (Amps) Battery Tender Junior 6V Battery Charger 6V 0.750A 3 Step STD & AGM 120 VAC, 60 Hz Battery Tender Junior 12V Battery Charger 12V 0.750A 4 Step STD & AGM 120 VAC, 60 Hz Waterproof 800 12V Battery Charger 12V 0.800A 3 Step STD & AGM 100 to 240 VAC, 50/60 Hz Battery Tender Plus 6V Battery Charger 6V 1.25A 4 Step STD & AGM 120 VAC, 60 Hz Battery Tender Plus 12V Battery Charger 12V 1.25A 4 Step STD & AGM 120 VAC, 60 Hz Battery Tender Plus 12V Battery Charger (Gel Cell) 12V 1.25A 4 Step STD & AGM or GEL 120 VAC, 60 Hz Battery Tender Twin 800 12V Dual Battery Charger 12V 0.800A 3 Step STD & AGM 100 to 240 VAC, 50/60 Hz Battery Tender 12V 2-Bank Battery Management System 12V 1.25A 3 Step STD & AGM 100 to 240 VAC, 50/60 Hz Battery Tender 12V 4-Bank Battery Management System 12V 1.25A 4 Step STD & AGM 100 to 240 VAC, 50/60 Hz Battery Tender 12V 5-Bank Battery Management System 12V 2.0A  4 Step STD & AGM 120 VAC, 60 Hz Battery Tender 12V 10-Bank Battery Management System 12V 2.0A  4 Step STD & AGM 120 VAC, 60 Hz *Note: All Deltran battery chargers will charge all types of lead acid batteries: either flooded (standard STD), sealed maintenance free Absorbed Glass Mat (AGM), or sealed maintenance free gelled electrolyte (GEL) batteries. However, for optimum battery performance in deep cycle applications (for example, running a trolling motor), it is best to chose the Deltran charger that has the charging software specifically designed for the battery type. Fortunately, since the technical staff at Deltran has developed charging software that works equally well for both STD & AGM batteries, the only choice to be made is between 2 models: either STD & AGM or GEL software. Three-year Limited Warranty Deltran provides a limited three-year warranty on its Battery Tender Waterproof 800 12-volt/.80-amp Battery Charger to the original purchaser based on defective material or workmanship. Warranty is void in cases of product misuse, disassembly or modification. Other details regarding warranty limitations and procedures are contained in the Deltran Battery Tender Charger's general limited warranty information sheet enclosed with this product.

Battery Tender Waterproof 800 12V Battery Charger is a compact 800 milliamp battery charger that has all the charge characteristics of its cousin the Battery Tender Junior. It incorporates highly efficient surface mount technology electronic components. The interior is completely encapsulated, protected from shock, vibration, and moisture by an electrically insulating, thermally conductive, flame retardant, UL recognized, synthetic epoxy resin compound. It is tough, affordable, and a strong, innovative battery charging solution and is no larger than a standard computer mouse yet packs 800 millamp of pure constant current charging power. Coupled with a brain which is the IC chip, the charger will constantly monitor, charge, and then maintain the battery even while totally submersed under water. It is perfect for all outdoor types of ATVs, watercraft, motorcycles, boats, or anywhere where water is a threat. This unit will work anywhere in the world with an international universal input range of 100-240 AC volt at 50/60 Hertz. An optional 25 feet extension cord (part number 081-0148-25) is sold separately.

Battery Tender 081-0069-4 Alligator Clips with Black 2-Pin Quick Disconnect Plug

Battery Tender 081-0069-4 Alligator Clips with Black 2-Pin Quick Disconnect Plug Review

Battery Tender 081-0069-4 Alligator Clips with Black 2-Pin Quick Disconnect Plug Feature

• 18" cord adaptor
• Plugs into all Deltran Battery Tenders
• Convenient for hard-to-access batteries
• Adaptor plug is compatible with most heated suits for motorcycles or snowmobiles
• Both Alligator Clips and Ring-Terminals come with each Battery Tender

Battery Tender Alligator Clips is an accessory for use with multiple batteries. It features a white Quick Disconnect plug and is 2 feet long. These clips can be used with 12 volt models only.

Battery Tender 081-0069-6 Ring Terminal Harness with Black Fused 2-Pin Quick Disconnect Plug

Battery Tender 081-0069-6 Ring Terminal Harness with Black Fused 2-Pin Quick Disconnect Plug Review

Battery Tender 081-0069-6 Ring Terminal Harness with Black Fused 2-Pin Quick Disconnect Plug Feature

• 18" cord adaptor
• Plugs into all Deltran Battery Tenders
• Convenient for hard-to-access batteries
• Adaptor plug is compatible with most heated suits for motorcycles or snowmobiles
• Both Alligator Clips and Ring-Terminals come with each Battery Tender

Battery Tender Ring Terminal Harness is an accessory for use with multiple batteries. It is equipped with a black Quick Disconnect plug and is suitable for use with 12 volt models only. This ring terminal harness includes a 3-amp fuse and is 2 feet in length.

Battery Tender Twin 800 12V Dual Battery Charger

Battery Tender Twin 800 12V Dual Battery Charger Review

Battery Tender Twin 800 12V Dual Battery Charger Feature

• Built-in "Supersmart" technology directed by the unit's IC chip not only fully charges your vehicle's battery when not in use, but safely maintains it at the proper storage voltage via float charge
• Sparkproof, as well as short circuit and reverse polarity protected
• Dual DC output and long cable capacity allowing for two batteries to be charged at once from a distance
• Easy to see, read and understand battery charge status indicator light display
• Classic V-Twin motorcycle outer housing mimics the sound of a motorcycle engine starting when you connect the charger to a battery

The Deltran Battery Tender BT-TWIN 800 International Battery Charger is the perfect way for motor-sport enthusiasts to express their love of classic hardware while keeping their vehicles safely and efficiently charged when not in use. Shaped to resemble a classic V-Twin motorcycle engine and able to play the sound of a motorcycle engine revving up when the charger is connected to a battery, it provides 12 Volt 800 mAmp power to up to 2 batteries simultaneously without risking damaging effects, like sulfation, caused by most trickle chargers on the market. Automatic battery charging power with a stylish, compact, lightweight design. View larger. Plenty of power The BT-TWIN 800 charger has two separate 12 volt outputs with 800 millamps of pure, constant current charging power. These two outputs mean that the unit is able to charge two batteries at the same time. In addition, other valuable power related features include a powerful "brain" (IC chip) that allows the charger to automatically monitor, charge, and then maintain your battery without harming it or sapping energy from it, and an easy to read and understand battery charge and status lights at the top of the unit. Although it is not recommend to operate this charger in extreme environmental conditions, it will charge batteries sized for ATV's, watercraft, motorcycles, boats, or just about any type of motor-sport vehicle. This unit will work anywhere in the world with an international universal input range of 100-240 AC Volts at 50/60 Hz. Striking V-Twin Design As its name indicates, the BT-TWIN 800 is a very close replica of the popular V-Twin motorcycle engine configuration. In addition, the unit contains an internal sound chip that mimics the sound of a motorcycle engine starting when you connect the charger to a battery. For your convenience, there is also a button to let you activate the sound at any time. This unique outer and finish does require a little extra care to avoid the risk of cosmetic damage to the housing, but this is easily done by simply exercising a little caution when handling the BT-Twin 800. Also, do not forget that this is an electrical appliance. Always use caution when handling appliances that are connected to AC power, or any other type of electrical power source. Lightweight, Mobile Design The BT-Twin 800 International battery charger is not designed to be mounted permanently on any surface, instead it has four nonskid pads under its base that allow it to sit on a level surface, like a table or work bench, and not move excessively while being used. This combined with the fact that it is very light--less than two pounds without cables--makes it very easy to use in the various areas that you store unused vehicles close to AC power sources. Key Features: Classic V-Twin motorcycle outer housing which mimics the sound of a motorcycle engine starting when you connect the charger to a battery. Built-in "Supersmart" technology directed by the unit's IC chip not only fully charges your vehicle's battery when not in use, but safely maintains it at the proper storage voltage. Sparkproof, as well as short circuit and reverse polarity protected. Dual DC output allowing for two batteries to be charged at once. Easy to see, read and understand battery charge status indicator light display. Charger Models Output Voltage Output Current Charging Software*/ Battery Type AC Voltage/ Frequency Input (Volts) (Amps) Battery Tender Junior 6V Battery Charger 6V 0.750A 3 Step STD & AGM 120 VAC, 60 Hz Battery Tender Junior 12V Battery Charger 12V 0.750A 4 Step STD & AGM 120 VAC, 60 Hz Waterproof 800 12V Battery Charger 12V 0.800A 3 Step STD & AGM 100 to 240 VAC, 50/60 Hz Battery Tender Plus 6V Battery Charger 6V 1.25A 4 Step STD & AGM 120 VAC, 60 Hz Battery Tender Plus 12V Battery Charger 12V 1.25A 4 Step STD & AGM 120 VAC, 60 Hz Battery Tender Plus 12V Battery Charger (Gel Cell) 12V 1.25A 4 Step STD & AGM or GEL 120 VAC, 60 Hz Battery Tender Twin 800 12V Dual Battery Charger 12V 0.800A 3 Step STD & AGM 100 to 240 VAC, 50/60 Hz Battery Tender 12V 2-Bank Battery Management System 12V 1.25A 3 Step STD & AGM 100 to 240 VAC, 50/60 Hz Battery Tender 12V 4-Bank Battery Management System 12V 1.25A 4 Step STD & AGM 100 to 240 VAC, 50/60 Hz Battery Tender 12V 5-Bank Battery Management System 12V 2.0A  4 Step STD & AGM 120 VAC, 60 Hz Battery Tender 12V 10-Bank Battery Management System 12V 2.0A  4 Step STD & AGM 120 VAC, 60 Hz *Note: All Deltran battery chargers will charge all types of lead acid batteries: either flooded (standard STD), sealed maintenance free Absorbed Glass Mat (AGM), or sealed maintenance free gelled electrolyte (GEL) batteries. However, for optimum battery performance in deep cycle applications (for example, running a trolling motor), it is best to chose the Deltran charger that has the charging software specifically designed for the battery type. Fortunately, since the technical staff at Deltran has developed charging software that works equally well for both STD & AGM batteries, the only choice to be made is between 2 models: either STD & AGM or GEL software. Three-year Limited Warranty Deltran provides a limited three-year warranty on its Battery Tender BT-TWIN International Battery Charger (materials and workmanship only). This does not include outer case breakage or cosmetic flaws on the outer case unless such damage is reported in writing along with a copy of the purchase receipt, via mail, e-mail, or facsimile within 30 working days after the date on the purchase receipt. Other details regarding warranty limitations and procedures are contained in the Deltran Battery Tender Charger's general limited warranty information sheet enclosed with this product.

Battery Tender BT-TWIN-DL-WH Twin 800 12V Dual Charger is a dual output battery charger that has all the charge characteristics of its cousins, the Battery Tender Junior and the Waterproof 800. In fact, it incorporates the same highly efficient surface mount technology electronic components that are used in the Waterproof 800. The BT-TWIN housing is a very close replica of the popular V-Twin motorcycle engine configuration. An internal sound chip mimics the sound of a motorcycle engine starting when the charger is connected to a battery and there is also a button to activate the sound at any time. This charger has 2 separate 12 volt outputs with 800 milliamps of pure constant current charging power. Coupled with the brain which is the IC chip, the charger will constantly monitor, charge, and then maintain the battery. It will charge batteries sized for ATVs, watercraft, motorcycles, boats, or just about any type of motor-sport vehicle. This unit will work anywhere in the world with an international universal input range of 100-240 AC volt at 50/60 Hertz.

Battery Tender 081-0069-6W Ring Terminal Harness with White Fused 2-Pin Quick Disconnect Plug

Battery Tender 081-0069-6W Ring Terminal Harness with White Fused 2-Pin Quick Disconnect Plug Review

Battery Tender 081-0069-6W Ring Terminal Harness with White Fused 2-Pin Quick Disconnect Plug Feature

• 18" cord adaptor
• Plugs into all Deltran Battery Tenders
• Convenient for hard-to-access batteries
• Adaptor plug is compatible with most heated suits for motorcycles or snowmobiles
• Both Alligator Clips and Ring-Terminals come with each Battery Tender

Battery Tender Ring Terminal Harness is an accessory for use with multiple batteries. It has a white Quick Disconnect plug and is suitable for use with 12 volt models only. This ring terminal harness contains a 3-amp fuse and is 2 feet in length.

Battery Tender 021-0156 Battery Tender Plus 12V Battery Charger True Gel Cell Model

Battery Tender 021-0156 Battery Tender Plus 12V Battery Charger True Gel Cell Model Review

Battery Tender 021-0156 Battery Tender Plus 12V Battery Charger True Gel Cell Model Feature

• Temperature-compensated to ensure optimum charge voltage according to ambient temperature
• Unique Gel Cell battery adjusted software allows for a slightly lower charge voltage and higher store voltage to protect sensitive true Gel Cell batteries
• Charges all lead-acid, flooded or sealed maintenance free batteries (AGM and Gel Cell)
• Complete 4-step charging program (initialization, bulk charge, absorption mode and float mode) allows for optimal constant battery levels without overcharging
• Automatically switches to float/maintenance voltage mode after fully charging the battery

The Battery Tender Plus 12-volt/1.25-amp Battery Charger True Gel Cell model is the best way to deal with the challenge of keeping 12-volt vehicle batteries optimally powered when not in use, especially for users who own true Gel Cell batteries. It is not only able to charge any 12-volt lead-acid battery, its specially adjusted internal software allows for a slightly lowered voltage level that protects sensitive Gel Cell batteries from the dangers of overcharging. It is also designed to be easy to use in difficult spaces, to utilize a 4-step charging program and safely function in a fully automatic mode. Taken together this makes the special Gel Cell version of the Battery Tender Plus 12-volt/1.25-amp Battery Charger an excellent means of ensuring that all your batteries are fully charged and ready to go when you are. 4-step charging with automatic float mode. View larger. The 4-step charge cycle detailed. View larger. What's a Gel Cell? The Gel Cell battery is similar to the AGM (Absorbed Glass Mat) battery in that its contents are sealed, but different because technically the AGM battery is still considered to be a wet cell. The guts of a Gel Cell contain a silica additive that causes it to set up or stiffen, first like Jell-O, then after subsequent discharge/charge cycles more like peanut brittle. Micro-cracks form in this gelled electrolyte that provide paths for the oxygen recombination reactions between the positive and negative plates. The recharge voltages on this type of cell are lower than the other styles of lead acid battery making it probably the most sensitive cell in terms of adverse reactions to over-voltage charging, and thus needing special care. Safe, 4-step Battery Charging for True Gel-Cell Batteries Powered by BTP microprocessor technology and utilizing a 4-step charging program (initialization, bulk charge, absorption mode and float mode), the Battery Tender Plus 12-volt/1.25-amp Battery Charger allows you to simply connect the charger to a battery, either in or out of a vehicle, and forget about it until you are ready to put the battery to work. Like all Battery Tender chargers, at the end of the regular charger cycle it automatically switches its output voltage to a safe, storage or float level which eliminates the need to worry about the damaging effects of overcharging, and the resulting need to check on the condition of the battery. This is taken even further with the Gel Cell model, which possess a higher store rate and lower charge rate, minimizing the chance of mistaken overcharging. The unit also features sparkproof connectors, short circuit and reverse polarity protection, an easy to understand charging status LED indicator, a quick connect harness for use in hard to reach areas and almost no current draw from batteries connected to. Key Features: Unique Gel Cell battery adjusted software. Perfect for all lead-acid, flooded or sealed maintenance free batteries (AGM and Gel Cell). Complete 4-step charging program (initialization, bulk charge, absorption mode and float mode). Automatically switches to float/maintenance voltage after fully charging the battery. If the battery voltage drops too far under load, full charger output power resumes. Temperature compensated to ensure optimum charge voltage according to ambient temperature. Solid state two color LED indicates stage of charger. Spark proof and reverse polarity protected. Includes quick connect harness for use in hard to reach areas. 10 year warranty. Charger Models Output Voltage Output Current Charging Software*/ Battery Type AC Voltage/ Frequency Input (Volts) (Amps) Battery Tender Junior 6V Battery Charger 6V 0.750A 3 Step STD & AGM 120 VAC, 60 Hz Battery Tender Junior 12V Battery Charger 12V 0.750A 4 Step STD & AGM 120 VAC, 60 Hz Waterproof 800 12V Battery Charger 12V 0.800A 3 Step STD & AGM 100 to 240 VAC, 50/60 Hz Battery Tender Plus 6V Battery Charger 6V 1.25A 4 Step STD & AGM 120 VAC, 60 Hz Battery Tender Plus 12V Battery Charger 12V 1.25A 4 Step STD & AGM 120 VAC, 60 Hz Battery Tender Plus 12V Battery Charger (Gel Cell) 12V 1.25A 4 Step STD & AGM or GEL 120 VAC, 60 Hz Battery Tender Twin 800 12V Dual Battery Charger 12V 0.800A 3 Step STD & AGM 100 to 240 VAC, 50/60 Hz Battery Tender 12V 2-Bank Battery Management System 12V 1.25A 3 Step STD & AGM 100 to 240 VAC, 50/60 Hz Battery Tender 12V 4-Bank Battery Management System 12V 1.25A 4 Step STD & AGM 100 to 240 VAC, 50/60 Hz Battery Tender 12V 5-Bank Battery Management System 12V 2.0A  4 Step STD & AGM 120 VAC, 60 Hz Battery Tender 12V 10-Bank Battery Management System 12V 2.0A  4 Step STD & AGM 120 VAC, 60 Hz *Note: All Deltran battery chargers will charge all types of lead acid batteries: either flooded (standard STD), sealed maintenance free Absorbed Glass Mat (AGM), or sealed maintenance free gelled electrolyte (GEL) batteries. However, for optimum battery performance in deep cycle applications (for example, running a trolling motor), it is best to chose the Deltran charger that has the charging software specifically designed for the battery type. Fortunately, since the technical staff at Deltran has developed charging software that works equally well for both STD & AGM batteries, the only choice to be made is between 2 models: either STD & AGM or GEL software. 10-Year Limited Warranty Deltran provides a limited 10-year warranty on its Battery Tender Plus 12-volt/1.25-amp Battery Charger to the original purchaser based on defective material or workmanship. Warranty is void in cases of product misuse, disassembly or modification. Other details regarding warranty limitations and procedures are contained in the Deltran Battery Tender Charger's general limited warranty information sheet enclosed with this product.

The BatteryTender Plus 12V Battery Charger True Gel Cell Model is the most advanced charger/maintainer on the market especially designed for today's GEL acid batteries. The BT Plus uses micro-processor technology in a four stage charging profile to charge, improve, and float your battery so it is ready when your are. Constant current charging and regulated voltage patterns allow the battery to be recharged fully and safely without the fear of overcharging. GEL Batteries need a lower voltage recharge and the Deltran BatteryTender does this for your automatically.

Battery Tender 022-0165-DL-WH 12-Volt 2-Bank Battery Management System

Battery Tender 022-0165-DL-WH 12-Volt 2-Bank Battery Management System Review

Battery Tender 022-0165-DL-WH 12-Volt 2-Bank Battery Management System Feature

• Solid state two color LED indicates stage of charger; spark proof and reverse polarity protected
• Two independent charging stations, each providing 12 volts/1.25 amps, with temperature compensation to ensure optimum charge voltage according to ambient temperature
• Complete 3-step charging program (Initialization, Bulk Charge, Float Mode) allows for optimization of battery power, without overcharging
• Perfect for all AGM (absorbed glass mat), sealed maintenance free and flooded batteries
• 2-year limited warranty

The Deltran Battery Tender 12-volt/1.25-amp 2-Bank Battery Management System is the simple solution to the challenge of keeping multiple vehicle batteries optimally powered when not in use. It is able to charge any two 12-volt lead-acid batteries, including standard and sealed AGM and Gel Cell battery types and is also designed to utilize a 3-step charging program and safely function in a fully automatic mode. Taken together this makes the Battery Tender 12-volt/1.25-amp 2-Bank Battery Management System an excellent means of ensuring that your batteries are fully charged and ready to go when you are. Safe, simultaneous 3-step charging of up to two batteries with automatic float mode. View larger. Charge any lead acid battery, including AGM and gel cell. View larger. Safe, 3-step Battery Charging The Battery Tender 12-volt/1.25-amp 2-Bank Battery Management System is much more than a trickle charger. Utilizing a 3-step charging program (initialization, bulk charge and float mode), it allows users to simply connect the charger to up to two batteries, either in or out of a vehicle and forget about it until you are ready to use it, with the confidence that the batteries in all four vehicles are being maintained at optimal performance levels. This makes it perfect for seasonal and recreational vehicles like motorcycles, jet skis, ATV's, snowmobiles and more. It is also safe for your battery because it utilizes advanced microprocessor technology that automatically switches its output voltage to a storage or float level. This feature eliminates the need to worry about the damaging effects of overcharging, and the resulting need to check on the condition of a charging battery. If or when the battery voltage drops too far under load, this same smart technology resumes output power and the charging cycle begins again. The unit also features sparkproof connectors, short circuit and reverse polarity protection, an easy to understand charging status LED indicator for each charging bank, durable lightweight construction and almost no current draw from batteries connected to it. Key Features: Two independent charging stations, each providing 12 volts/1.25 amps. Complete 3-step charging program (initialization, bulk charge and float mode). Microprocessor controlled constant current that automatically switches to float/maintenance voltage after fully charging the battery. Perfect for all AGM (absorbed glass mat), sealed maintenance free and flooded batteries. Solid state two color LED indicates stage of charger. Spark proof and reverse polarity protected. Temperature compensated to ensure optimum charge voltage according to ambient temperature. Two year warranty. Charger Models Output Voltage Output Current Charging Software*/ Battery Type AC Voltage/ Frequency Input (Volts) (Amps) Battery Tender Junior 6V Battery Charger 6V 0.750A 3 Step STD & AGM 120 VAC, 60 Hz Battery Tender Junior 12V Battery Charger 12V 0.750A 4 Step STD & AGM 120 VAC, 60 Hz Waterproof 800 12V Battery Charger 12V 0.800A 3 Step STD & AGM 100 to 240 VAC, 50/60 Hz Battery Tender Plus 6V Battery Charger 6V 1.25A 4 Step STD & AGM 120 VAC, 60 Hz Battery Tender Plus 12V Battery Charger 12V 1.25A 4 Step STD & AGM 120 VAC, 60 Hz Battery Tender Plus 12V Battery Charger (Gel Cell) 12V 1.25A 4 Step STD & AGM or GEL 120 VAC, 60 Hz Battery Tender Twin 800 12V Dual Battery Charger 12V 0.800A 3 Step STD & AGM 100 to 240 VAC, 50/60 Hz Battery Tender 12V 2-Bank Battery Management System 12V 1.25A 3 Step STD & AGM 100 to 240 VAC, 50/60 Hz Battery Tender 12V 4-Bank Battery Management System 12V 1.25A 4 Step STD & AGM 100 to 240 VAC, 50/60 Hz Battery Tender 12V 5-Bank Battery Management System 12V 2.0A  4 Step STD & AGM 120 VAC, 60 Hz Battery Tender 12V 10-Bank Battery Management System 12V 2.0A  4 Step STD & AGM 120 VAC, 60 Hz *Note: All Deltran battery chargers will charge all types of lead acid batteries: either flooded (standard STD), sealed maintenance free Absorbed Glass Mat (AGM), or sealed maintenance free gelled electrolyte (GEL) batteries. However, for optimum battery performance in deep cycle applications (for example, running a trolling motor), it is best to chose the Deltran charger that has the charging software specifically designed for the battery type. Fortunately, since the technical staff at Deltran has developed charging software that works equally well for both STD & AGM batteries, the only choice to be made is between 2 models: either STD & AGM or GEL software. Two-year Limited Warranty Deltran provides a limited two-year warranty on its Battery Tender 12-volt/1.25-amp 2-Bank Battery Management System to the original purchaser based on defective material or workmanship. Warranty is void in cases of product misuse, disassembly or modification. Other details regarding warranty limitations and procedures are contained in the Deltran Battery Tender Charger's general limited warranty information sheet enclosed with this product.

The Battery Tender 2-Bank charger is a top of the line 12 volt 1.25 amp charger/maintainer using the BT Plus recharge profile. The BatteryTender 2-Bank uses micro-processor technology in a four stage charging profile to charge, improve, and float your battery so it is ready when your are. Constant current charging and regulated voltage patterns allow the battery to be recharged fully and safely without the fear of overcharging. The real bonus is that the 2-Bank is capable of charging two batteries at once.